Rule X extended to score ballots

@tobypereira I think this example actually shows my point. In this case, (with very high probability if the approval sets are truly uncorrelated) any two of the winners will satisfy EJR (and thus also PJR/JR), so it is not restrictive at all. I'm sure you have seen this paper thrown around before, but it gives some nice examples of how two different committees, both satisfying EJR, are not necessarily all of the same quality.
Unless I'm misunderstanding the setup, I'm not sure why you are saying the two 51% will necessarily be elected (although, in this case it does seem like the 'right' choice).
I agree that it is a somewhat weak criterion in the grand scheme of things, and I would like to simultaneously optimize a metric like maxPhragmen (or related). I don't see them as clumsy at all though. In fact, every quotaspending rule (that sequentially selects a candidate with >= quota of support when they exist) satisfies PJR and thus JR.
You can find the versions of JR I think you're referring to as "strong" and "semistrong" JR, where a solid Hare quota gets exactly that consensus candidate elected. Unfortunately, as you said, it's not always possible.
Edit: I should probably mention there is another intuitive criterion, perfect representation. This is when the voters can be exactly divided into quotas such that each quota gets a unanimous winner. Obviously, this is also not always possible, but more importantly it is incompatible with EJR. This is one reason maybe it's reasonable to consider EJR 'clumsy.' However, it is compatible with PJR. It seems to me that PJR is weak enough such that any noncompliance is likely indicative of deeper problems. In particular, optimization of the maxPhragmen metric implies PJR. Your 'squared load' metric I believe is equivalent to the varPhragmen objective function, which implies JR.

@keithedmonds @brozai , is there a way to get the Wikipedia page author to also put a page on electowiki.org? Seems like it might be faster since no approval would be required.

@andydienes said in Rule X extended to score ballots:
I see JR / PJR / EJR as more of a litmus test; passing it does not tell you a lot about the method, but NOT passing it requires a very good explanation for the method to be considered further.
Although didn't the paper say that anything passing EJR was going to be difficult to compute efficiently? That suggests that for some applications, there is a good explanation to consider sacrificing EJR: you can't spare either the time or the complexity.
On the other hand, that's still no excuse to use a method that doesn't pass PJR, even a sequential one.

@marylander I suppose it depends on how you define 'efficient.' Rule X satisfies EJR, and I would not say it is much more complicated than any other quotaspending method! Computationally it is the same amount of work.
no excuse to use a method that doesn't pass PJR
Completely agree. This is why welfarist rules like RRV are basically a nonstarter in my eyes.

@andydienes said in Rule X extended to score ballots:
This is why welfarist rules like RRV are basically a nonstarter in my eyes.
Agreed. So it comes down to SSS, MES and Allocated score.
Consider this 5 winner example with clones for each candidate
Red: 61% vote A:5, B:3, C:0
Blue: 39% vote A:0, B:3, C:5RRV Gives ['A1', 'C1', 'A2', 'B1', 'B2']
MES Gives ['A1', 'A2', 'A3', 'C1', 'B1']
SSS Gives ['A1', 'B1', 'B2', 'B3', 'B4']
Allocated score Gives ['A1', 'B1', 'A2', 'B2', 'A3']
STV Gives ['A1', 'A2', 'A3', 'C1', 'C2']I could have made a calculational error but I did it with code which I can post if people want to look for bugs. If correct this is super interesting. They all give different results.
Which sets are in the core? If any?

OK lets look at these results more deeply
RRV Gives ['A1', 'C1', 'A2', 'B1', 'B2']
 Total Utilities for each group of 16 and 11MES Gives ['A1', 'A2', 'A3', 'C1', 'B1']
 Total Utilities for each group of 18 and 8SSS Gives ['A1', 'B1', 'B2', 'B3', 'B4']
 Total Utilities for each group of 17 and 12Allocated score Gives ['A1', 'B1', 'A2', 'B2', 'A3']
 Total Utilities for each group of 21 and 6STV Gives ['A1', 'A2', 'A3', 'C1', 'C2']
 Total Utilities for each group of 15 and 10The fist thing to check for is if the winner sets are stable. The larger group is 61% so it should control 3/5 of the seats. The best set of size 3 for them is [A,A,A] giving utility of 15. Each set above gives the larger group at least 15 so [A,A,A] does not block. Similarly for the smaller group controlling 1 seat [C] does not block. For sets of size 5 it must be preferred by every voter. The set given by SSS blocks both STV's and RRV's set meaning that those sets are not stable. I think the other 3 are.
I am not sure how to choose between the three remaining sets but it is interesting to consider that the members of 61% group would be expected to have about 61% of the total utility. For STV this is nearly exact since 15/(15 + 10) = 60% this is why people tend to think it does well.
RRV: 16 / (16 + 11) = 0.59
MES: 18 / (18 + 8 ) = 0.69
SSS: 17 / (17 + 12) = 0.58
Allocated score: 21 / (21 + 6) = 0.77
STV: 15/(15 + 10) = 0.60Interestingly RRV and STV both do very well even though they were eliminated by being unstable. SSS does well too but MES and Allocated Score do not.
Another way to think about it is total utility
RRV: 16 + 11 = 27
MES: 18 + 8 = 26
SSS: 17 + 12 = 29
Allocated score: 21 + 6 = 27
STV: 15 + 10 = 25Again SSS is best. As the inventor of SSS I am trying to not be biased. Is there something I am missing? Is this just a special case? Perhaps we should simulate it like we did before to see what typical results are

@keithedmonds Purely qualitatively, I think given this profile, Red needs to win more than Blue since it is equally cohesive and 50% larger. Again qualitatively, I think a cohesive group representing 40% of the population should get at least one of their top winners.
This leaves AAABC (from MES) and AAACC (from STV) as what I would identify as the 'best' performance on this particular ballot profile. However, this one is a bit of an edge case and the numbers work out very closely. I always feel uneasy about making too large conclusions from single examples, since any method can be made to look bad.
The results will also look extra weird because the ratios of supports do not play well with 5 winners for this specific scenario. With 4 winners I think AABC will look very reasonable, and with 6 winners AAABCC or AABBBC is right.
In particular, if the Red voters are strategic really at all, it looks like they can squeeze out more winners in RRV and SSS by burying B. I am interested in using the definition of "balanced stable priceability" here https://www.cs.toronto.edu/~nisarg/papers/priceability.pdf to measure stabilityI am not sure how or if it relates to the definition based on blocking sets.

@keithedmonds said in Rule X extended to score ballots:
Interestingly RRV and STV both do very well even though they were eliminated by being unstable. SSS does well too but MES and Allocated Score do not.
On the other hand, RRV and STV choose winner sets where all voters are strictly worse off than under the SSS winner set, so if we make the assumption* that the sum of the scores can be used to determine which overall committee the voter would approve, then could be interpreted as quite a bad example for RRV and STV.
* I'm not calling it an unreasonable assumption, but it is an assumption and so I'm stating it. Perhaps we could test it with surveys, although in my opinion the meaning of scores depends on the voting system to some extent, so it might not be easy.
Edit:
@andydienes said in Rule X extended to score ballots:
@keithedmonds Purely qualitatively, I think given this profile, Red needs to win more than Blue since it is equally cohesive and 50% larger. Again qualitatively, I think a cohesive group representing 40% of the population should get at least one of their top winners.
I started writing this post before you replied @AndyDienes (so I posted before I could comment on what you said), and I just want to observe that this objection I think relates to my discussion about about whether we can assume that "greater sum score = better winner set" at the level of the individual.

@marylander said in Rule X extended to score ballots:
the meaning of scores depends on the voting system to some extent
1million% agree.
Imagine voting rule F, which is just pure sumofscore
winner(F) = maximize sum of score(voter, candidate)now imagine voting rule G, which is sum of squared score
winner(G) = maximize sum of score(voter, candidate)^2Then almost all voters will change their ballots depending on the rule being used such that the outcome is the same, i.e. square all their scores. If we just measure linear utility of both, we will get different results, even though the strategic dynamics are pretty much the same and the winner is the same.
Also, just to wax philosophical & speculative for a moment (and then I promise I will return to quantitative thoughts) I think we all agree that allowing for compromise & centrist candidates is a good thing. However, it seems that if a voting rule has too much of a centrist bias then voters will exaggerate their preferences to compensate. When voters exaggerate their preferences, it seems like they might start to believe those preferences, and then ironically a more centrist voting rule creates a more polarized electorate. This would be taken to the extreme in something like Block Score, which is the maximallycentrist method but would very plausibly lead to divisiveness in an electorate.
Of course, the above is just a hypothesis; I won't claim to be able to understand or predict longterm societal dynamics. I will say, I think all else held equal, a proportional representation method should attempt to simply replicate the distribution of voters. Any bias towards centrism must be minimal enough to not create an unstable outcome. In the case of a method on that profile choosing AAABB or ABBBB, I would certainly feel 'cheated' if I were a Blue voter, and in subsequent elections I would probably be less willing to compromise.

@andydienes said in Rule X extended to score ballots:
In the case of a method on that profile choosing AAABB or ABBBB, I would certainly feel 'cheated' if I were a Blue voter, and in subsequent elections I would probably be less willing to compromise.
This contradicts you prior statement about how a voter will adjust their scoring to the system.
Suppose the the voter is using a mental model to map utility, u, to score, s.s = S(u)
What we want is for this function to obey Cauchy's functional equation such that.
S(u1 + u2) = S(u1) + S(u2)
This mental model is derived from how the system treats scores. In SSS and MES the scores are treated linearly so that such a model arises naturally. In RRV and Allocated Score this is not the case so they will have to adjust the S(u) function to compensate. Even though it is not clear how.
Having this additive property is nice since it means that if you like a candidate have as much as another then you should score them half as much. Simplicity is important.
Consider the Blue group comparing ['A1', 'B1', 'B2', 'B3', 'B4'] to ['A1', 'A2', 'A3', 'C1', 'C2']
The expressed the scores B=3 and C = 5
B + B + B + B =12
C + C = 10B + B + B + B > C + C
S(uB) + S(uB) +S(uB) +S(uB) > S(uC) + S(uC)
S(uB +uB + uB + uB) > S(uC + uC)
uB +uB + uB + uB > uC + uCWhich proves they are happier with 4 Bs than 2 Cs. If they are not happier then they did not use that mental model to map utility. In this sense, SSS and MES can punish strategic voting.

@keithedmonds said in Rule X extended to score ballots:
This contradicts you prior statement about how a voter will adjust their scoring to the system.
Hm, fair enough.
I think my mental model of voter preferences is something like:
 Voters (generally) have a better sense of a preference ranking than they do actual utility distributions over candidates
 Voters' utilities (whether they acknowledge it or not) tend to decay somewhat geometrically over their preferences
 Even given the above two assumptions, voters nonetheless tend to report utilities in more linear way over their preferences
This third point led me to tacitly apply some superlinear transformation to the utilities when I am thinking about who should win qualitatively, but I see what you are saying that if voters wanted this superlinear transformation interpretation they would have just voted that way. It still would feel weird to me for C not to get even 1 winner, but I will try to quantify that in a more robust way.

@andydienes said in Rule X extended to score ballots:
@tobypereira I think this example actually shows my point. In this case, (with very high probability if the approval sets are truly uncorrelated) any two of the winners will satisfy EJR (and thus also PJR/JR), so it is not restrictive at all.
My point wasn't that it was restrictive, but that it seemed a bit weak, making requirements about just one voter (but you acknowledged that later in your post).
Unless I'm misunderstanding the setup, I'm not sure why you are saying the two 51% will necessarily be elected (although, in this case it does seem like the 'right' choice).
Well, the two 51% candidates should be elected under any reasonable method given the lack of any correlation. But in any case, the point is that it shows that approximately 1/8 of the electorate will be unrepresented despite being part of a Hare quota.
Edit: I should probably mention there is another intuitive criterion, perfect representation. This is when the voters can be exactly divided into quotas such that each quota gets a unanimous winner. Obviously, this is also not always possible, but more importantly it is incompatible with EJR. This is one reason maybe it's reasonable to consider EJR 'clumsy.' However, it is compatible with PJR. It seems to me that PJR is weak enough such that any noncompliance is likely indicative of deeper problems. In particular, optimization of the maxPhragmen metric implies PJR. Your 'squared load' metric I believe is equivalent to the varPhragmen objective function, which implies JR.
There are cases where it is arguably undesirable to have perfect representation. I added an example to the wiki page. But to copy and paste:
Consider the following election with two winners, where A, B, C and D are candidates, and the number of voters approving each candidate are as follows:
100 voters: A, B, C
100 voters: A, B, D
1 voter: C
1 voter: D
A method passing the perfect representation criterion must elect candidates C and D despite near universal support for candidates A and B. This could be seen as an argument against perfect representation as a useful criterion.
Also, on PJR, it's worth pointing out that SainteLaguĂ«/Webster can in some circumstances fail the lower quota rule, so presumably fails this criterion. See example on Warren Smith's site. And I would generally consider this to be a fair system.

@marylander said in Rule X extended to score ballots:
On the other hand, RRV and STV choose winner sets where all voters are strictly worse off than under the SSS winner set, so if we make the assumption* that the sum of the scores can be used to determine which overall committee the voter would approve, then could be interpreted as quite a bad example for RRV and STV.
* I'm not calling it an unreasonable assumption, but it is an assumption and so I'm stating it. Perhaps we could test it with surveys, although in my opinion the meaning of scores depends on the voting system to some extent, so it might not be easy.
Even aside from scores, and looking at full approvals, there are scenarios where a "Pareto dominated" result is arguably better. See the archive here.

@andydienes said in Rule X extended to score ballots:
Voters (generally) have a better sense of a preference ranking than they do actual utility distributions over candidates
Agreed but they do have some sense and that helps. This is the same as adding noise the the system and it will largely average out
Voters' utilities (whether they acknowledge it or not) tend to decay somewhat geometrically over their preferences
I do not agree. This is what people say about money but not candidates
Even given the above two assumptions, voters nonetheless tend to report utilities in more linear way over their preferences
I think that even if it is flawed it would be good to be able to make this as an honest recommendation for how to vote.

@tobypereira said in Rule X extended to score ballots:
Also, on PJR, it's worth pointing out that SainteLaguĂ«/Webster can in some circumstances fail the lower quota rule, so presumably fails this criterion
True! And moreover, anything satisfying priceability (which is a very intuitive criterion to me, implies PJR) must be an extension of D'Hondt.
The example you have given for perfect representation is an example of how it is incompatible with Pareto efficiency. I definitely agree this is a mark against it.
I think we are really on the same page: we both agree that PJR is desirable and weak, just I view failures of PJR as more damning than you do. FWIW, I also prefer D'Hondt to St. Lague

@andydienes said in Rule X extended to score ballots:
anything satisfying priceability (which is a very intuitive criterion to me, implies PJR)
Can you (or somebody) make a priceability electowiki page?

I wanted to see how these committees fared in terms of
a) the Maximin Support objective, equivalent to the maxPhragmen objective
b) stable priceability, which implies coreI transformed scores to approvals by having each voter choose a uniform random approval threshold in (0,1). It took me a little bit to formulate the linear programs, so there may be bugs, but my calculations give, averaged over 1000 trials,
AAABC: maximin support = 1 (quota), stable priceable probability = 0.4
ABBBB: maximin support = 0.75 (quota), stable priceable probability = 0
AAABB: maximin support = 0.84 (quota), stable priceable probability = 0
AAACC: maximin support = 0.96 (quota), stable priceable probability = 0.25
AABBC: maximin support = 1 (quota), stable priceable probability = 0.46Important note: these are the values for the committees not for the selection rules that originally found them. The example as given is really a very edge case with tight numbers, so the randomness in approval thresholds helps smooth that out a little. I expect the committees these rules return would change a lot with a little noise added.
BTW, I think this might illustrate my heuristic objection to defining stability (and preferences over sets) as just pure linear utility. With the literal linear utility interpretation, ABBBB is stable and blocks both AABBC and AAACC. However, if we interpret the score 3/5 as a 60% probability of approval, suddenly ABBBB is never stable, and AABBC & AAACC both have nontrivial stability probability. Furthermore, if either (or both) 1) that score of 3 is lowered slightly to like 2.8 or 2) some small fraction of voters choose to bullet vote, all of a sudden ABBBB does not look particularly good either from a stability standpoint or utility.

@marylander said in Rule X extended to score ballots:
On the other hand, RRV and STV choose winner sets where all voters are strictly worse off than under the SSS winner set,
It's weird that RRV has done that since its mechanism is just to maximise the "satisfaction" score for each voter. I presume then that this is to do with electing sequentially rather than something fundamental to RRV itself. And I would also presume that electing sequentially can throw out weird anomalies for any voting method, and I don't see any particular reason why any method should be more susceptible than any other method to this.
As an aside, regardless of what one thinks of Thiele methods in general, I do not consider RRV to be a good implementation of it.

@andydienes said in Rule X extended to score ballots:
I wanted to see how these committees fared in terms of
a) the Maximin Support objective, equivalent to the maxPhragmen objective
b) stable priceability, which implies coreDo these need to be defined in terms of Approval? Can you give the formula you used for clarity?
@andydienes said in Rule X extended to score ballots:
The example as given is really a very edge case with tight numbers
As intended. It is only going to be such cases where they differ in results. @BTernaryTau Can you make a Ternary plot for MES. It would be interesting to see the differences between. SSS, MES, Allocated Score, RRV and STV.
@andydienes said in Rule X extended to score ballots:
I expect the committees these rules return would change a lot with a little noise added.
This was how I started the simulations from last time. I simulated the supporters as gaussian blobs that I put in the 2D plane. The default example in vote_sim.py is somewhat similar to this example.
@tobypereira said in Rule X extended to score ballots:
It's weird that RRV has done that since its mechanism is just to maximise the "satisfaction" score for each voter.
Simulation have show that RRV gets higher total utility more often. I suspect this is just a weird example for RRV.
@tobypereira said in Rule X extended to score ballots:
I presume then that this is to do with electing sequentially rather than something fundamental to RRV itself. And I would also presume that electing sequentially can throw out weird anomalies for any voting method, and I don't see any particular reason why any method should be more susceptible than any other method to this.
I would not say that. Systems like SSS and MES are designed to be sequential. That may be the issue with RRV but SSS and MES do not have the same excuse. DSV is the sequential implementation of Thiele for score. Or at least I designed it to be a close to SPAV as I could.
Perhaps an Optimal (non sequential) variant of MES could be made where the rho is the same for all winners. This should minimize free riding like with SSQ but do it more cleanly
@tobypereira said in Rule X extended to score ballots:
As an aside, regardless of what one thinks of Thiele methods in general, I do not consider RRV to be a good implementation of it.
You prefer Sequential Proportional Score Voting, correct?

As far as I can tell, there is no particularly obvious way to extend the definitions to score while maintaining polytime computability (at least, not that I can theoretically motivate). That is why I chose to transform to approval with random thresholds.
I am computing maximin support as described in Theorem 2 of this paper https://arxiv.org/pdf/1609.05370.pdf
And stable priceability as defined in section 3 of this paper https://www.cs.toronto.edu/~nisarg/papers/priceability.pdf
also
Perhaps an Optimal (non sequential) variant of MES could be made where the rho is the same for all winners. This should minimize free riding like with SSQ but do it more cleanly
I would be surprised if this is always possible, but it's an interesting idea. I am assuming you mean to still choose the winners sequentially, given some uniform rho?
edit: at the very least, it will be possible when every candidate has at least one bullet voter... you can set rho to be very high 1/(minimum over all scores awarded). Then this is the greedy chamberlincourant rule where a score > 0 is interpreted as an approval. It might still have the issue where not every winner gets a full quota.